SmartAir Variable Speed Vacuum Pump Control System
SmartAir Variable Speed Vacuum Pump Control System - controls the vacuum level of your milking machine without the use of a conventional vacuum regulator. It compensates for vacuum use by increasing or decreasing the vacuum pump speed on demand.
Using a transducer mounted into the main airline a SmartAir VSD will monitor and adjust the vacuum, sensing every minute airflow change and compensating for this by altering the speed of the vacuum pump.
Easily programmable and able to be interrogated the SmartAir controller almost looks after itself. Proven over years of service and supported by ABB world wide technical support, it is without doubt the vacuum pump controller of choice.
- A SmartAir variable speed controller will maintain your milking vacuum with absolute precision
- A SmartAir variable speed controller will help reduce the cost of running your vacuum pump motor by up to 47%
- No longer will your vacuum pump be operating continuously at full speed
|
|
 |
Waikato Blower Vacuum Pumps
Waikato Blower vacuum pumps are proven to be robust, reliable and the best source of vacuum for large dairies. Three pumps sizes are available ranging in airflow from 1000 to 11500Litres per minute. Only 1 pump is required even for the largest dairy.
When connected to a SmartAir variable controller, Blower pumps out perform all others providing accurate vacuum on demand.
Blower vacuum pumps require very little maintenance, they are clean and environmentally friendly and when connected to a variable speed controller (VSD) operate well within the noise limits expected in modern dairies.
BP500 BP400 BP200
Airflow capacity @ 50Kpa
BP500 10000Lpm 18Kw
BP400 6500 15Kw
BP200 4500 11Kw